S7 Punches and Holders

Pieh Tool S7 Fly Press Tooling and Accessories

Our tooling was designed specifically to work with a fly press and are usefull in decorative blacksmithing projects. They are 3 inches long and are made from 1/2 inch round S7 tool steel and heat treated to exact specifications. Proudly Made in the USA exclusively for the Pieh Legacy Collection.

!

Pieh Tool Fly Press Ball Punches
!
Pieh Legacy Collection

Our fly press ball punches are made from S7 tool steel and are 1/2 inch diameter and approximately 3 inches long. They fit in the 1/2 inch tool extenstion (shown in photo) we offer (Item# PTTE12).

Made in USA

Pieh Tool Fly Press Center Punch
!
cp300_fp
Pieh Legacy Collection

Our fly press center punch is made from S7 tool steel and is 1/2 inch diameter and approximately 3 inches long. It fits in the 1/2 inch tool extenstion we offer (Item# PTTE12).  It is held in the tooling extension as shown in the fly press ball punch photo above.

Made in USA 

Item #: CP000-FP

Pieh Tool Fly Press Duck Eye Punch
!
de000_fp_000
Pieh Legacy Collection

Our fly press wolf eye punch is made from S7 tool steel and is 1/2 inch diameter and is approximately 3 inches long. It fits in the 1/2 inch tool extenstion we offer (Item# PTTE12).  It is held in the tooling extension as shown in the fly press ball punch photo above. 

Item #: DE000-FP

Pieh Tool Fly Press Eagle Eye Punch
!
Pieh Legacy Collection

Our fly press eagle eye punch is made from S7 tool steel and is 1/2 inch diameter and is approximately 3 inches long. It fits in the 1/2 inch tool extenstion we offer (Item# PTTE12).  It is held in the tooling extension as shown in the fly press ball punch photo above.

Made in USA  

Item #: EE000-FP

Pieh Tool Fly Press Horse Head Ear Punch
!
Pieh Legacy Collection

Our fly press horse head ear punch is made from S7 tool steel and is 1/2 inch diameter and is approximately 3 inches long. It fits in the 1/2 inch tool extenstion we offer (Item# PTTE12).  It is held in the tooling extension as shown in the fly press ball punch photo above.

Made in USA

Item #: HE000-FP

Pieh Tool Fly Press Round Eye Punch
!
Pieh Legacy Collection

Our fly press round eye punches are made from S7 tool steel and are 1/2 inch diameter and approximately 3 inches long. They fit in the 1/2 inch tool extenstion we offer (Item# PTTE12).  Photo on right shows all three sizes offered.  They are held in the tooling extension as shown in the fly press ball punch photo above.

Made in USA

Pieh Tool Fly Press Wizard Eye Socket Punch
!
Pieh Legacy Collection

Our fly press eye socket punch is made from S7 tool steel and is 1/2 inch diameter and is approximately 3 inches long. It fits in the 1/2 inch tool extenstion we offer (Item# PTTE12).  It is held in the tooling extension as shown in the fly press ball punch photo above.

Made in USA

Item #: ES000-FP

Pieh Tool Fly Press Wolf Eye Punch
!
Pieh Legacy Collection

Our fly press wolf eye punch is made from S7 tool steel and is 1/2 inch diameter and is approximately 3 inches long. It fits in the 1/2 inch tool extenstion we offer (Item# PTTE12).  It is held in the tooling extension as shown in the fly press ball punch photo above.

Made in USA  

Item #: WE000-FP

Pieh Tool Fly Press Tooling Extension, 1/2 inch
!
Pieh Legacy Collection

Designed specifically to hold our S7 1/2 inch punches. Tool extension shank is 1 inch diameter. Set screw allows for fast and eaxy tooling changes. If you require a smaller shank to fit your press please call us. We can make other sizes by special order.

Made in USA.

Item #: PTTE12