Sealers and Primers
!

Renaissance Wax

EAN: 0649387000014
Renaissance Wax is an extra-ordinary wax/polish. Restore, refresh and protect your antiques, cutlery, furniture, precious metals, armory, collectibles, art, photography and much, much more. It's uses are endless. The #1 choice of museums, galleries and professionals worldwide.

How the "Perfect Wax" was created...
For over forty years, RENAISSANCE WAX polish from England has been the #1 choice of major museums, art galleries and institutions for the preservation of the precious pieces. Professional conservators, retailers, amateur restorers and private individuals throughout the world depend on RENAISSANCE WAX to protect their collections and for home use.Prior to 1950, the only polishes available were based on beeswax and carnuba wax. Unfortunately, these natural, saponifiable products would cause damage when acids arose spontaneously through oxidation or hydrolysis.

Item #: RWAX-65ml, RWAX-200ml or RWAX-3L

 

Water Base Primer (Prime-It)

When applying traditional or acid patinas to the Metal Coatings over iron, steel, or aluminum, a primer must first be used to protect the underlying metal from corrosion. This one part primer is recommended to protect the original ferrous surface. This is the quickest curing and strongest primer available for ferrous metals.

Practical coverage: 200-350 square feet.

This amazing one part, water base, no VOC primer was designed for use in severe industrial environments for the protection of steel structures. It provides excellent chemical, abrasion, and corrosion resistance.

Any surface should be cleaned before applying the primer. Spray or brush on.

Available in 8 oz., 32 oz and 1 gallon sizes.

This is also a great product to use over polyurethane products before applying the Metal Coatings.

Item #: VBWP-8, VBWP-32 or VWBP-G

 

Clear Guard Sealer - Satin Finish

Clear Guard is a crystal clear, durable, air drying lacquer that results in a hard, fast drying, and tarnish resistant film. It has excellent adhesion to bronze, brass, copper, and other metals as well as to patinas and rusted metal. Clear Guard is suitable for use with all types of application equipment. Once thinned, it may be used with sprayers.
 
Because of its unique chemistry, orange peel is virtually non-existent. Clear Guard is UV stable and highly resistant to weather, water, and chemical damage. It also resists marring and perspiration better than most solvent lacquers.
 
Clear Guard is made in both normal and environmentally friendly formulas. It is sold in 12 oz. spray cans or 8 oz., 32 oz., 1 gal. containers.  

Clear Guard 12 oz. spray cans are only shipped by ground.

Item #: PLS-S, PLS-32, PLS-1

 

Clear Guard Sealer - Matte

Clear Guard is a crystal clear, durable, air drying lacquer that results in a hard, fast drying, and tarnish resistant film. It has excellent adhesion to bronze, brass, copper, and other metals as well as to patinas and rusted metal. Clear Guard is suitable for use with all types of application equipment. Once thinned, it may be used with sprayers.

Because of its unique chemistry, orange peel is virtually non-existent. Clear Guard is UV stable and highly resistant to weather, water, and chemical damage. It also resists marring and perspiration better than most solvent lacquers.

Clear Guard is made in both normal and environmentally friendly formulas. It is sold in 12 oz. spray cans or 8 oz., 32 oz., 1 gal. containers.

Clear Guard 12 oz. spray cans are only shipped by ground.

Item #: PLF-S, PLF-32, PLF-1

 

Permalac Enviormentally Safe Spray

Clear Guard Sealer - Enviormentally Friendly Spray

Clear Gaurd EF (environmentally friendly) has lower VOC and no solvent odor. It is an incredible solvent lacquer for all types of metals (contains inhibitors for Iron & Steel and well as Bronze, Brass, & Copper).

Clear Guard 12 oz. spray cans are only shipped by ground.

Item #: PLEF-F or PLEF-S

 

Smart Coat 1K, Sealer

Smart Coat 1K is an easy to use urethane/resin sealant for all metal surfaces. Once dry, it forms a durable top coat that resists UV damage, humidity, abrasion, and corrosion. Smart Coat 1K has zero VOC, no odor, and is non-hazardous. It is terrific over polished metal, rust, and other patina finishes. It does not tend to change the color of a patina unlike solvent clear coats.

It is best applied using a spray bottle. One gallon typically covers 250 square feet.

Item #: SC1K.8M, SC1K.8S, SC1K.32M, SC1K.32S, SC1K.GM, SC1K.GS

 

Metal Oil, 8 oz

The Metal Oil should be applied with a soft cloth, brush, or spray. It will dry hard in 3-12 hours. Clear Guard or Metal Wax may be applied over the oil. Available in clear, black, brown, green, and red.

Item #: MOK.8,  MOB.8, MOC.8, MOG.8, MOR.8